Several girls sitting on the floor collaborating and building something together.

Stage 5 in the Design Thinking Process: Test

by Rikke Friis Dam and Teo Yu Siang | | 9 min read
1,018 shares

We employ a wide range of testing methods during the design thinking process, many of which are also used in human-computer interaction (HCI) and user-centered design (UCD) processes. At the heart of these methods is the need to test our solutions so that we can improve them. User feedback is priceless—without it, the iterative design process will fail. Therefore, you must seek feedback whenever possible, use real people in your tests and analyze results to determine what is right (and wrong) with your design. That’s how you can create a solution that is desirable to people, feasible to implement and viable for long-term success.

You should conduct tests throughout the design thinking process. Tests go hand in hand with prototypes, since you will most often test your prototypes with users. Given that, you should constantly create prototypes—start with low-fidelity ones and move to higher-fidelity ones as you progress—and test them with users. When you test your ideas and prototypes with users, you gain a deeper understanding of your users and also gain their feedback to improve your designs.

In fact, the Test stage of the design thinking process often feeds into other stages: your findings allow you to empathize and gain a better understanding of your users; it may lead to insights that change the way you define your problem statement; it may generate new ideas to solve the user problem; and, finally, it helps you improve your prototype.

Illustration of the 5-Stage design process showing how it is not linear.

The five stages of Design Thinking—Empathize, Define, Ideate, Prototype and Test—are not sequential steps in a project. Instead, they are “modes” that you take on during each phase of your project (sometimes in parallel or in iterative loops), as and when they would give you the most learning and value. For instance, you can create prototypes early on in the project—ahead of ideation—to help your team empathize with users.

The test stage of the design thinking process often feeds into the other stages—that’s the beauty of the iterative design process.

© Teo Yu Siang and the Interaction Design Foundation, CC BY-NC-SA 3.0.

5 Guidelines for Conducting a Test

1. Show, don’t tell: let your users experience the prototype

Make sure to introduce yourself. Never, ever say you are the designer, even if you are. People will be less honest with feedback if they think you are the author and won’t want to hurt your feelings. Explain how long the session should take, what your expectations are for them and what they are going to be doing. Always ask if they have any questions before starting.

Avoid over-explaining how your prototype works, or how it is supposed to solve your user’s problems. Let the users’ experience in using the prototype speak for itself, and observe their reactions.

2. Ask Participants to Talk Through Their Experience

When participants are exploring the prototype, ask them to tell you what they’re thinking. Let them know that they should think out loud and speak what’s on their minds during the entire test session. This doesn’t come naturally to people, so you may have to prompt the participant during the test to remind them. In your intro to the test, make sure to let them know you are expecting this and give an example. You want them to let you know what they expect to happen when they select something or what they were expecting to see on the screen based on the title or location.

3. Observe Your Participants

Be a neutral observer. Observe how your participants use your prototype and resist the urge to correct them when they misinterpret how it’s supposed to be used. Mistakes are valuable learning opportunities. Remember that you are testing the prototype, not the participant.

4. Ask Follow-Up Questions

Always follow up with questions, even if you think you know what the participant means. Ask questions such as “What do you mean when you say ___?”, “How did that make you feel?”, “What did you expect would happen?” and, most importantly, “Why?”.

5. Negative Feedback is Your Way to Learn and Improve

When you test your ideas and prototypes, remember that negative feedback is an important way to learn and improve. You might feel a sting in the moment when you hear a person complain about how difficult your prototype is to use, but try to get used to the idea that such feedback will help you in the long run. You will uncover problems that you and your team might not have even considered. Always remember that:

Quote by Sir Ken Robinson,

Quote from Sir Ken Robinson.

© Daniel Skrok and the Interaction Design Foundation, CC BY-NC-SA 3.0.

The End Goal: Desirable, Feasible and Viable Solutions

Venn diagram of Feasibility, Viability, and Desirability with the goal at the intersection of the three circles.

© Teo Yu Siang and the Interaction Design Foundation, CC BY-NC-SA 3.0.

The design thinking process doesn’t follow a fixed sequence of steps, but it has an ideal end point. The end goal of every design thinking project is a solution that is desirable, feasible and viable.

  • Desirability focuses on people. It’s what puts the “human” in human-centered design. Your solution is desirable if it appeals to the needs, emotions and behaviors of the people you target.

  • Feasibility is about technology. Is your design solution technically possible or does it depend on a technology that’s yet to be invented (or good enough for regular use)?

  • Viability is about whether your design solution works as a business. Is there an appropriate business model behind your solution, or would it collapse after a few years without investor or donor contributions? Design thinking is not about making a profit, but good design solutions should be self-sustaining. That way, you can continue to support and improve your solution way beyond the project deadline.

When you are able to create a prototype (or finished product or service) that satisfies the desirability, feasibility and viability tests, pat yourself on the back, congratulate your team, or even do a small dance if you like! You’ve designed a solution that will impact people around you for the better, and one that will continue to improve lives in the years to come.

The Take Away

Testing is the fifth stage in the five-stage design thinking process. You often perform tests together with the prototyping stage. Through testing, you can learn more about your users, improve your prototype and even refine your problem statement. To help you plan a test, there are a number of guidelines you can follow:

  1. Show, don’t tell: let your people experience the prototype.

  2. Ask test participants to talk through their experience.

  3. Observe your users.

  4. Ask follow-up questions.

  5. Negative feedback is your way to learn and improve.

And, last but not least, the design thinking process is fluid, iterative and flexible: the different stages often feed into one another and don’t necessarily follow any fixed sequence. That said, the ideal end point of design thinking (when you know you’ve done a great job) is when the product or service is desirable, feasible and viable.

References & Where to Learn More

Course: “Design Thinking - The Ultimate Guide”.

IDEO: Human-Centered Design Toolkit, 2009.

Images

Hero Image: © Loy9, CC BY 2.0.

1,018 shares

Open Access—Link to us!

We believe in Open Access and the democratization of knowledge. Unfortunately, world-class educational materials such as this page are normally hidden behind paywalls or in expensive textbooks.

If you want this to change, , link to us, or join us to help us democratize design knowledge!